shopify POS芯片式和刷卡式读卡器安装介绍

安装芯片式和刷卡式读卡器

芯片式和刷卡式读卡器带有两张安装贴纸，您可将其用于粘贴到其他设备（如手机或平板电脑的背面）或光滑的平面上。如果您拆下芯片式和刷卡式读卡器，则可以将安装贴纸擦干净并重复使用。

在安装贴纸之前清洁安装表面和芯片式和刷卡式读卡器，以确保粘贴牢固。

安装芯片式和刷卡式读卡器：1. 从安装贴纸的一侧撕下保护膜。2. 将安装贴纸粘贴在芯片式和刷卡式读卡器的背面（没有 logo 的一面）。3. 撕下安装贴纸上剩余的保护膜。4. 按住安装面上芯片式和刷卡式读卡器的贴纸侧，保持 3 秒。

打开和关闭芯片式和刷卡式读卡器的电源

若要打开芯片式和刷卡式读卡器，请按下并释放读卡器侧面的电源按钮。状态灯将亮起。如果您已将读卡器与您的 POS 设备进行了配对和连接，此读卡器会自动连接到您的设备。

在处于非活动状态 30 秒后，芯片式和刷卡式读卡器将进入待机模式，状态指示灯每 5 秒闪烁一次。在待机模式下，如果在结账时接受卡付款，读卡器会自动开启。

在处于非活动状态 3 小时后，芯片式和刷卡式读卡器自身会完全关闭。当您下次想通过卡收费时，您需要再次按下电源按钮然后松开以打开读卡器。通常情况下，您一天只需要打开一次读卡器。您随时可以手动关闭读卡器：长按住电源按钮，直到状态灯熄灭。

芯片式和刷卡式读卡器的状态指示灯

每当打开芯片式和刷卡式读卡器时，状态指示灯会显示读卡器的连接状态以及读卡器是否需要充电：

当状态指示灯变为红色时，您可以继续进行销售，但应尽快为读卡器充电。

Shopify商户官网原文详情：

Mount the Chip & Swipe Reader

The Chip & Swipe Reader comes with two mounting stickers, which you can use to attach it to another device (such as the back of a cellphone or tablet) or a smooth, flat surface. If you detach your Chip & Swipe Reader, then the mounting sticker can be wiped clean and re-used.

Clean the mounting surface and the Chip & Swipe Reader before attaching the mounting sticker to ensure a strong bond.

To mount the Chip & Swipe Reader: 1. Remove the protective film from one side of the mounting sticker. 2. Attach the mounting sticker to the back of the Chip & Swipe Reader (the side with no logo). 3. Remove the remaining protective film from the mounting sticker. 4. Press the sticker side of the Chip & Swipe Reader against the mounting surface and hold for 3 seconds.

Power the Chip & Swipe Reader on and off

To turn on the Chip & Swipe Reader, press and release the power button on the side of the reader. The status light turns on. If you've already paired and connected the reader with your POS device, then the reader automatically connects to the device.

After 30 seconds of inactivity, the Chip & Swipe Reader goes into standby mode, and the status light flashes every 5 seconds. While in standby mode, the card reader turns on automatically when you take a card payment at checkout.

After 3 hours of inactivity, the Chip & Swipe Reader turns itself off fully. When you next want to take a card payment, you need to press and release the power button to turn on the card reader again. Typically you need to turn on the card reader only once a day. You can manually turn off the reader at any time by pressing and holding the power button until the status light turns off.

The Chip & Swipe Reader status light

Whenever the Chip & Swipe Reader is turned on, its status light shows the reader's connection status and whether the reader needs to be charged:

Continuous flashing	The card reader is ready to connect to a POS device.
Flashing every 5 seconds	The card reader is in standby mode.
Green	The card reader is charged.
Yellow	The card reader is charging.
Red	The card reader's battery is at 10% and the reader should be charged.
No light	The card reader is turned off.

You can continue to make sales when the status light turns red, but you should charge the reader soon.

文章内容来源：Shopify商户官方网站

（本文内容根据网络资料整理和来自用户投稿，出于传递更多信息之目的，不代表本站其观点和立场。本站不具备任何原创保护和所有权，也不对其真实性、可靠性承担任何法律责任，特此声明！）

常见问答(FQAS)

POS机芯片式和刷卡式读卡器在功能上没有太大区别,主要区别在于读卡方式不同:芯片式读卡器需要卡主将信用卡插入读卡器打开的卡槽内,刷卡式读卡器可以直接将卡面刷过读卡器的读卡器头,无需插入。总体来说,芯片式读卡器体积更小,方便携带;刷卡式读卡器操作更简单直接。

Shopify POS机读卡器安装过程很简单,主要分为以下步骤:1. 将读卡器连接上POS机,一般读卡器接口为usb接口;2. 打开POS机软件,点击“设置”,选择“读卡器”选项;3. 选择正确的读卡器型号,点击“添加”按钮添加读卡器;4. 测试读卡器是否可读取信用卡信息。全程无需额外驱动安装。安装完毕后即可正常使用读卡功能进行收款交易。

Shopify POS机读卡器本身没有网络功能,但通过POS机即可实现联网功能。POS机作为中间体,可以将读卡信息通过WiFi或有线网络上传到Shopify后台,实现线上线下收款一体化。在Shopify POS机设置中,需要配置读卡器型号并连接网络,这样读卡信息就可以实时上传到线上进行进一步处理。